TG2 — the anti-TIGIT clone with documented advantages over TG1 in human FFPE IHC.

Clone TG2 · Cat. no. DIA-TG2-M · Academic pricing available

Scientific USP

Documented advantages over TG1

Higher affinityTo TIGIT · vs TG1
Stronger tonsil stainingIHC intensity · vs TG1
Higher dilutabilityvs TG1

The new clone TG2 shows higher staining intensity.

Documented for tonsil IHC in comparison with clone TG1 (section P·09).

Mouse monoclonal antibody for studying human TIGIT in formalin-fixed, paraffin-embedded tissue. The clone-specific datasheet documents immunogen, detection-system-dependent starting dilutions, epitope retrieval, tonsil as positive control and a membranous lymphocyte staining pattern. TG2 shows higher affinity to TIGIT, stronger staining intensity in tonsil IHC and higher dilutability compared with TG1.

  • CloneTG2 (monoclonal)
  • Catalog numberDIA-TG2-M
  • Species reactivityHuman
  • Host speciesMouse
  • IsotypeMouse IgG1/κ
  • ApplicationsIHC on standard FFPE sections · Western blot
  • IHC starting dilution1:50 – 1:200
  • Positive controlTonsil
  • Staining patternMembranous (lymphocyte subsets)
  • Format100 µl, lyophilized

Complete product data: Description, section P·04 ↓

Product image of the ONCOdianova anti-TIGIT antibody clone TG2: TIGIT immunohistochemistry of human tonsil with numerous TIGIT-positive lymphocytesOpen the full-size product image
Product image · Clone TG2 · DIA-TG2-M
Evidence layer 01

Clone-specific datasheet

Datasheet DIA-TG2-M (V05, 25 Feb 2025; content identical to V03, 22 Feb 2022) documents identity, immunogen, formulation, reconstitution, storage, FFPE-IHC starting conditions, positive control and a reference image of human tonsil.

Evidence layer 02

Documented starting conditions

Heat-induced epitope retrieval in an autoclave (121 °C, 5 min, Tris-EDTA-citrate pH 7.8); 1:50 for biotin/(strept)avidin-based and 1:100–1:200 for polymer-based detection. A documented artefact note covers weak nuclear/nucleolar signal in some epithelia.

Evidence layer 03

Comparison with TG1

TG2 shows higher affinity to TIGIT, stronger staining intensity in tonsil IHC and higher dilutability compared with TG1 (section P·09).

TG2 reference image and TIGIT tissue gallery: section P·02 ↓

Everything about DIA-TG2-M, complete in eight sections.

Data package.

Datasheet

Datasheet_DIA-TG2_anti-TIGIT

Product data, instructions for use, storage, general references and the tonsil reference image.

Download PDF ↓

PDF · V05 · 25 Feb 2025 · 297 KB

Tech note · DIA-TG2-M · clone TG2

TIGIT staining, manual and automated

Manual immunohistochemistry and the Leica Bond RX procedure for clone TG2, with the dilutions of datasheet DIA-TG2-M — 1:100–1:200 for polymer-based and 1:50 for biotin/(strept)avidin-based detection.

Download PDF ↓

PDF · V01 · 7 Sep 2026 · 130 KB

Safety

MSDS

Material safety data sheet (ONCOdianova, all lyophilized antibodies).

Download PDF ↓

PDF · V02 · 216 KB

Controlled product data.

Cat.No.DIA-TG2-M
SpecificityTIGIT
Species ReactivityHuman
Host SpeciesMouse
IsotypeIgG1
CloneTG2
ApplicationImmunohistochemistry (IHC),
Formalin-fixed Paraffin-embedded sections (FFPE)
Western Blot
Conjugationunconjugated
DilutionIHC 1:100-1:200
FormatLyophilisate
Antibody purified (from culture supernatant)
Quantity100µl
PresentationPBS pH 7.4, 2%BSA, 0.05%NaN3
Intended UseFor Research Use Only. Not for use in diagnostic procedures.
Manufacturer / BrandONCOdianova GmbH
ProductAnti-TIGIT (Human) from Mouse
Catalog numberDIA-TG2-M
Distributor catalog numberODN-DIA-TG2-M (BIOZOL)
SKUTIGIT-1
Product categoryCancer Immunology IHC marker
SpecificityTIGIT
TargetTIGIT — T-cell immunoreceptor with Ig and ITIM domains (Gene ID 201633, UniProt Q495A1)
Species reactivityHuman
Host speciesMouse
IsotypeMouse IgG1/κ
CloneTG2 (monoclonal)
ImmunogenRecombinant peptide from the extracellular domain of human TIGIT
ApplicationsIHC on standard FFPE sections; Western blot
ConjugationUnconjugated
IHC starting range1:50 – 1:200 — 1:50 for biotin/(strept)avidin-based detection, 1:100–1:200 for polymer-based detection; optimal dilution to be determined by the user for tissue, fixation, platform and detection system
FormatLyophilized powder; antibody purified from culture supernatant
Quantity100 µl
ReconstitutionRestore to 100 µl with sterile distilled water; gentle shaking for 10 minutes
Buffer / formulationPBS, pH 7.4, 2% BSA, 0.05% sodium azide
Epitope retrievalHeat-induced epitope retrieval required; autoclave 121 °C, 5 min, Tris-EDTA-citrate pH 7.8 recommended
Positive controlTonsil
Staining patternMembranous (lymphocyte subsets)
Comparison with TG1Higher affinity to TIGIT, stronger staining intensity in tonsil IHC and higher dilutability compared with TG1 (section P·09)
Associated antibodiesDIA-TG1-M (anti-TIGIT, clone TG1) · DIA-R12 (anti-PVRIG/CD112R, clone R12) — as listed in the datasheet
StorageLyophilized at 2–8 °C; long-term at −20 °C (stable for at least one year); reconstituted at 2–8 °C short term (several weeks); avoid repeated freeze/thaw cycles
Notice of useFor Research Use Only. Not for use in diagnostic procedures.
ManufacturerONCOdianova GmbH

Most of the technical specifications above are documented in datasheet DIA-TG2-M V05 (25 Feb 2025), whose product content is identical to V03 (22 Feb 2022); gene and protein entries link to their registries. Distributor catalog number, SKU, product category, western blot as an application and the pack size are taken from the ONCOdianova TG2 product page and the distributor listing. No specification, protocol or publication of clone TG1 has been transferred to this table. Each laboratory must validate its own conditions.

Reactivity of clone TG2.

Reactivity

Clone TG2 recognizes human TIGIT in formalin-fixed, paraffin-embedded (FFPE) tissue and produces membranous staining of TIGIT-positive lymphocyte subsets in immunohistochemistry. Human tonsil serves as the documented positive-control tissue.

Compared with TG1, TG2 is characterized by higher affinity for TIGIT. TG2 also allows a higher working dilution and shows stronger staining intensity in human tonsil IHC. Methodologically, TG2 can be used within the same established FFPE-IHC workflow as TG1, combining strong TIGIT binding, clear membranous staining and high dilutability.

Species reactivityHuman
Host speciesMouse
Structures stained by TG2 in FFPE tissueCell membranes of various lymphocyte subtypes
Positive controlTonsil — normal human tonsil with numerous TIGIT-positive lymphocytes
Staining patternMembranous
ApplicationsIHC on human FFPE tissue; Western blot

Manual and automated procedures.

Documented starting protocols. Procedures 1 and 2 are the manual and the automated staining method of the tech note “TIGIT staining manual + automated”, here for clone TG2. The method is the same; the dilution is a different one and follows datasheet DIA-TG2-M: 1:50 for biotin/(strept)avidin-based and 1:100 – 1:200 for polymer-based detection. DIA-TG2-M is reconstituted in 100 µl. All dilutions are starting values; each laboratory validates tissue, fixation, platform and detection itself.

Procedure 1Manual immunostaining · IHC on FFPE tissueTech note · clone TG2

Slide preparation

  1. Mount 4 µm sections on Superfrost slides
  2. Deparaffinize tissue sections in xylene (2 × 5 min)
  3. Rehydrate in descending ethanol series (100%, 90%, 80%, 70%)
  4. Rinse 5 min in TBST* buffer

Pretreatment (epitope retrieval)

  1. Autoclave for 5 min** at 121 °C in TEC*** buffer pH 7.8 (1× concentration)
  2. Rinse 5 min in TBST* buffer

Peroxidase blocking

  1. Incubate 10 min in Peroxidase-Blocking Solution (#S2023, DAKO REAL™)
  2. Rinse 2 × 5 min in TBST* buffer

Antibody incubation

  1. Dilute primary antibody anti-TIGIT, clone TG2 (DIA-TG2-M), 1:100 – 1:200 in antibody diluent (#S2022, DAKO REAL™) — polymer-based detection, datasheet DIA-TG2-M
  2. Cover tissue section with 100–200 µl diluted antibody
  3. Incubate 1 h at 37 °C in a moist chamber
  4. Rinse 2 × 5 min in TBST* buffer
  5. Apply DAKO EnVision Polymer-HRP mouse/rabbit kit (#K5007, DAKO REAL™) according to the kit protocol
  6. Rinse 2 × 5 min in TBST* buffer

Chromogen and counterstain

  1. Cover slides for 10 min with DAB chromogen (DAKO EnVision Polymer-HRP mouse/rabbit kit, #K5007)
  2. Wash slides thoroughly in distilled water
  3. Counterstain for 20 s with hematoxylin (Mayer’s Hematoxylin 41-5131-00, Medite GmbH)
  4. Develop for 5 min in water
  5. Dehydrate in ascending ethanol series, wash in xylene, apply mounting medium and coverslips

* TBST wash buffer (#K8000, DAKO)
** Incubate 5 min after the autoclave has reached 121 °C
*** TEC stock solution = 20× Tris-EDTA-citrate buffer: per 1 l distilled water dissolve 5 g Trizma base (Sigma T 1503), 10 g EDTA (Merck 1.08418.0250), 6.4 g trisodium citrate (Sigma C 0909); adjust to pH 7.8 using 1 mol/l HCl

Procedure 2Automated immunostaining · Leica Bond RXTech note · clone TG2

Before loading the system

  1. Dewax and rehydrate sections
  2. Heat-induced epitope retrieval (HIER) before entering the slides into the system: ER2, high-pH buffer pH 9.0, 100 °C, 20 min (the tech note also names autoclave at 121 °C, 5 min as an alternative)
  3. Cool slides

Bond RX protocol

  1. Peroxide block (Leica Microsystems), 5 min, ambient
  2. Bond wash solution, 3 ×
  3. Primary antibody anti-TIGIT, clone TG2 (DIA-TG2-M), 1:100 – 1:200, 37 °C, 60 min — polymer-based detection, datasheet DIA-TG2-M
  4. Bond wash solution, 3 ×
  5. Post Primary (Leica Microsystems), 30 min
  6. Bond wash solution, 3 × 2 min
  7. Polymer (Leica Microsystems), 30 min
  8. Bond wash solution, 2 × 2 min; deionized water, 1 ×
  9. Mixed DAB Refine, 10 min
  10. Deionized water, 3 ×
  11. Hematoxylin (Leica Microsystems), 5 min
  12. Deionized water 1 ×, Bond wash solution 1 ×, deionized water 1 ×; mount

Dispense volume 150 µl per step.

Procedure 3Instructions for use of the datasheetDatasheet DIA-TG2-M · V05 · 25 Feb 2025

Preparation and epitope retrieval

  1. Reconstitution: restore DIA-TG2-M to 100 µl with sterile distilled water, gentle shaking for 10 minutes
  2. Deparaffinize and rehydrate according to standard procedures
  3. Heat-induced epitope retrieval (HIER) is required
  4. Recommended: stringent heat pretreatment in an autoclave at 121 °C (5 min) in Tris-EDTA-citrate, pH 7.8 (e.g. TEC-buffer)

Antibody dilution by detection system

  1. General recommendation of the product table: dilution 1:50 – 1:200 (IHC-P) — a general starting range, not the protocol dilution of any particular detection route
  2. Biotin/(strept)avidin-based detection (e.g. Vectastain® Elite® ABC-HRP-kit/AEC): antibody at 1:50
  3. Polymer-based detection (e.g. Dako EnVision™ detection system, Peroxidase/DAB): antibody at 1:100–1:200
  4. Run positive and negative controls in parallel; positive control: tonsil

The two detection techniques are two separate routes of the datasheet, each with its own dilution. They are neither combined nor merged into a range; the 1:50 – 1:200 range of the product table is a general statement.

Expected result

  1. The antibody stains cell membranes of various lymphocyte subtypes
  2. Weak non-specific nuclear/nucleolar staining may occur in some epithelial tissues (i.e. colon cancer)

Target literature.

  1. Lozano E et al. The TIGIT/CD226 axis regulates human T cell function. Journal of Immunology (2012). doi:10.4049/jimmunol.1103627 · PMID 22427644Target biology
  2. Pauken KE, Wherry EJ. TIGIT and CD226: tipping the balance between costimulatory and coinhibitory molecules to augment the cancer immunotherapy toolkit. Cancer Cell (2014). doi:10.1016/j.ccell.2014.11.016 · PMID 25490444Target biology
  3. Blake SJ et al. Molecular Pathways: Targeting CD96 and TIGIT for Cancer Immunotherapy. Clinical Cancer Research (2016). doi:10.1158/1078-0432.CCR-16-0933 · PMID 27620276Target biology

How to read the staining.

Expected pattern

Membranous, lymphocyte subsets

The datasheet describes membranous staining of various lymphocyte subtypes and shows human TIGIT in FFPE tonsil stained with clone TG2 – normal tonsil with numerous TIGIT-positive lymphocytes – as the positive control.

Documented artefact

Weak nuclear / nucleolar signal

The datasheet states that weak non-specific nuclear or nucleolar staining may occur in some epithelial tissues, for example colon cancer. Such signal should not be scored as TIGIT positivity; run positive and negative controls in parallel.

Scope of evidence

Documented evidence scope

The documented evidence for TG2 is datasheet DIA-TG2-M V05 — identity, immunogen, FFPE-IHC starting conditions, tonsil control and the tonsil reference image — together with the documented comparison versus TG1 (higher affinity, stronger tonsil staining intensity, higher dilutability; section P·09). These comparison statements are documented relative to TG1.

TG2 vs TG1 — documented differentiation.

Affinity

Looking for a TIGIT antibody with higher affinity?

TG2 has higher affinity than TG1. This is a documented comparison between the two ONCOdianova anti-TIGIT clones.

Tonsil signal

Stronger TIGIT staining intensity in human tonsil IHC compared with TG1

TG2 shows stronger staining intensity than TG1 in IHC on human tonsil, the documented positive-control tissue of both clones. This comparison is documented in human tonsil IHC.

Dilutability

Higher dilutability

TG2 has higher dilutability than TG1, with a documented IHC-P starting range of 1:50–1:200. Higher dilutability can support more efficient reagent use in IHC workflows.

The three statements above are a documented comparison between TG2 and TG1, the two ONCOdianova anti-TIGIT clones.

TIGIT in research.

TIGIT (T-cell immunoreceptor with Ig and ITIM domains; also VSTM3, VSIG9, WUCAM) is an inhibitory receptor of the poliovirus receptor/nectin family. Upon binding its ligands CD155 (PVR) and CD112 (nectin-2), it delivers inhibitory signals to T cells and NK cells (UniProt Q495A1). TIGIT and the co-stimulatory receptor CD226 compete for the same ligands; this TIGIT/CD226 axis regulates human T-cell function.[1, 2]

TIGIT is expressed on subsets of T lymphocytes; expression has been reported on NK cells, regulatory T cells, follicular T-helper cells, memory CD4+ T cells and CD8+ T cells, but not on B cells or naive CD4+ T cells (datasheet summary). TIGIT and CD96 are studied as targets for cancer immunotherapy.[3]

These statements describe the target TIGIT. Clone TG2 is a research tool for tissue-based TIGIT studies in human FFPE tissue.

  • GeneTIGIT — NCBI Gene 201633
  • ProteinT-cell immunoreceptor with Ig and ITIM domains — UniProt Q495A1
  • AliasesVSTM3 · VSIG9 · WUCAM
  • LigandsCD155 (PVR), CD112 (nectin-2) — UniProt annotation
  • Counter-receptorCD226 (DNAM-1) — Lozano et al. 2012 [1]
  • Not to be confused withTransglutaminase 2 (TGM2) — “TG2” is the clone name only

Bracketed numbers refer to the target-literature list below. Target biology is kept separate from clone-specific product claims.

TIGIT in translational immuno-oncology research.

Target-level

Translational context

TIGIT is an inhibitory immune-checkpoint receptor and a therapeutically investigated target. Independent research has investigated tissue TIGIT expression in relation to the tumor immune contexture and to response under anti-PD-1 therapy.

Clone

What the clone can be used to study

Clone TG2 can be used to study TIGIT-positive lymphocyte subsets in human FFPE tissue with a membranous staining pattern, with higher affinity, stronger tonsil staining intensity and higher dilutability compared with TG1.

Research use

Research application

TG2 is a research-use antibody for studying TIGIT-positive lymphocyte subsets in human FFPE tissue. For Research Use Only. Not for use in diagnostic procedures.

Frequent scientific questions.

What is TIGIT clone TG2?

TG2 is a mouse monoclonal antibody (IgG1/κ) raised against a recombinant peptide from the extracellular domain of human TIGIT. It is offered as a research reagent for immunohistochemistry on human formalin-fixed, paraffin-embedded (FFPE) tissue.

What is DIA-TG2-M?

DIA-TG2-M is the ONCOdianova catalog number of the anti-TIGIT antibody clone TG2: mouse monoclonal (IgG1/κ), reactivity human, IHC on FFPE tissue, 100 µl lyophilized, tonsil as positive control. The distributor catalog number at BIOZOL is ODN-DIA-TG2-M.

How does TG2 differ from TG1?

TG1 and TG2 are two separate mouse monoclonal hybridoma clones against human TIGIT with separate catalog numbers (DIA-TG1-M and DIA-TG2-M). TG2 is documented by its own datasheet, and shows higher affinity, stronger tonsil staining intensity and higher dilutability compared with TG1. Evidence, protocols and images of one clone do not apply to the other.

Is TG2 suitable for human FFPE IHC?

Yes. TG2 is documented for IHC on human FFPE tissue: datasheet DIA-TG2-M V05 documents detection-system-dependent starting dilutions (overall 1:50 to 1:200), heat-induced epitope retrieval, tonsil as positive control and a membranous lymphocyte staining pattern.

What is the recommended dilution for TG2 IHC?

The datasheet states 1:50 for biotin/(strept)avidin-based detection and 1:100 to 1:200 for polymer-based peroxidase/DAB detection (overall range 1:50 to 1:200 for IHC on FFPE tissue). The optimal dilution must be determined by the user for each tissue, fixation, platform and detection system.

Which epitope retrieval does TG2 require?

Heat-induced epitope retrieval is required. The datasheet recommends stringent heat pretreatment in an autoclave at 121 °C for 5 minutes in Tris-EDTA-citrate buffer, pH 7.8 (TEC buffer).

What positive control tissue is documented for TG2?

Human tonsil. The datasheet shows normal human tonsil with numerous TIGIT-positive lymphocytes and describes membranous staining of various lymphocyte subtypes.

What staining pattern is documented for TG2?

A membranous staining pattern of various lymphocyte subtypes, shown in the datasheet on human tonsil. The datasheet additionally notes that weak non-specific nuclear or nucleolar staining may occur in some epithelial tissues; such signal should not be scored as TIGIT positivity.

Are there known staining artefacts with TG2?

The datasheet states that weak non-specific nuclear or nucleolar staining may occur in some epithelial tissues, for example colon cancer. Such signal should not be scored as TIGIT positivity; positive and negative controls should be run in parallel.

Does TG2 have higher affinity than TG1?

TG2 has higher affinity than TG1. This comparison is documented between the two ONCOdianova anti-TIGIT clones.

How did TG2 compare with TG1 in tonsil IHC?

TG2 showed stronger staining intensity in human tonsil IHC compared with TG1. This comparison is documented in human tonsil IHC, the positive-control tissue of both clones.

Which TIGIT clone has higher dilutability?

TG2 has higher dilutability than TG1. Higher dilutability can support more efficient reagent use in IHC workflows. The documented IHC-P starting range for TG2 is 1:50 to 1:200.

Which TIGIT clone should be considered for routine FFPE IHC?

Both ONCOdianova anti-TIGIT clones are documented for IHC on human FFPE tissue with tonsil as positive control. TG2 is documented by its own datasheet, and shows higher affinity, stronger tonsil staining intensity and higher dilutability compared with TG1. Which clone suits a study depends on the application; each laboratory validates its own conditions.

Is TG2 related to transglutaminase 2?

No. “TG2” is the clone name of this anti-TIGIT antibody. It has nothing to do with transglutaminase 2 (TGM2) or anti-transglutaminase autoantibodies.

How to order DIA-TG2-M.

Ordering. ONCOdianova products are purchased through our distribution partner BIOZOL Diagnostica Vertrieb GmbH, Oehleckerring 11–13, 22419 Hamburg, Germany — order requests by e-mail: order@biozol.de (CC info@oncodianova.com). See also order information.

Datasheet V05 (25 Feb 2025) is the current datasheet for DIA-TG2-M; its product content is identical to V03 (22 Feb 2022); V05 changed only the distributor address. Related: TG1 (separate anti-TIGIT clone) · R12 (CD112R/PVRIG) · KK3 (CD73/NT5E) · TC8 (CD8) · FX3 (FOXP3).

For Research Use Only. Not for use in diagnostic procedures.